Overview This job is a design job for physical computer mounts which will be made in metal and will be modular so they can be scaled up. The design will be initial design ideas shown by drawings, which will then be made into engineering drawings and put into CAD with STEP output so they can be given to the metal fabricators to make.
Summary Our company designs a small desktop computer, the Louvar ZX12, which is installed on ships, where space is tight. Datasheet as attached.
We currently have made simple mounting brackets as follows:
- Angle mounts to bolt the computer to a desk. - Stack mounts which allow computers to be stacked up to 4 units high. - Vertical mount case, for a vertical mounting position.
Pictures as attached.
The design brief
We now have a requirement to design mountings as follows:
1. Side mount, to attach between 1 to 4 x Louvars to the side of a desk (left or right).
This should be a modular design, so each mount can attach to another mount, with fixings to mount the whole thing to the side of a desk.
Each pc has a power supply which is at the back of each pc, and this needs to be housed as well.
We also need to house a KVM switch, which will have a psu, and this is a different size to the pc’s. There will be 1 x KVM switch to 4 x pc’s.
We would prefer a sleeve design, so that the pc slips inside the sleeve, and then it can be secured with bolts which align with the fixings on the side of the pc.
Consideration should be given to how each unit can be removed easily, without disturbing the cable sand power supply at the back.
The case should be strong enough to support up to 4 x pcs and 4 x psu’s. But weight is a consideration, and we should try and reduce weight in the mount wherever possible.
Steel is the preferred material, which will then be powder coated.
2. Under desk
When mounted under the desk, the pcs will go horizontally, in a modular arrangement, with 1 x KVM switch.
3. Desk mount
The design is to have one pc on top of the other, and side by side.
The KVM switch and the psu to be included.
Again, a modular arrangement.
4. Rack mount
The requirement is for up to 6 x pc’s and 6 x psu’s to be mounted on a shelf in a standard 19-inch computer rack.
The pc’s will be mounted vertically.
An extra strong shelf will need to be designed to support the weight.
This job will suit a design engineer who has experience in designing in metal, and who has an understanding of metal fabrication.
PrestaShop E-Commerce Store Build Category: CSS, ECommerce, HTML, Payment Gateway Integration, PHP, Prestashop, SEO, Web Development, Web Design, Website Optimization Budget: €1500 - €3000 EUR
12-Feb-2026 11:01 GMT
Optimize OBS Stream & Record Category: Audio Engineering, Video Conferencing, Video Editing, Video Hardware, Video Processing, Video Production, Video Services, Video Streaming Budget: $10 - $30 USD
12-Feb-2026 11:00 GMT
AI Marketing Video Production Category: After Effects, AI (Artificial Intelligence) HW / SW, AI Chatbot Development, AI Content Creation, AI Design, Animation, Video Editing, Video Services Budget: $15 - $25 USD
Manual Tester for Corporate Website Category: Accessibility Testing, Graphic Design, HTML, Test Plan Writing, Test Strategy Writing, User Experience Research, User Interface / IA, Web Design, Website Testing Budget: $250 - $750 USD
